110 Ton Gap Frame Press
TM1-110
The Titan 110 Ton Gap Frame Press is OSHA/ANSI compliant. These presses are built to our own specifications therefore making them extremely reliable and allowing us to provide all the latest features available.
In Stock
In Transit
110 Ton Gap Frame Press
Specifications
| Capacity in Tons | 121 |
| Torque Capacity from BDC | 0.197″ |
| Stroke Length | 7.09″ |
| Speed Range at Full Tonnage | 30-60 SPM |
| Area of Slide (R-L x F-B) | 37.8″ x 20.47″ |
| Recommended Max Upper Die Weight | 1,210 lbs |
| Bolster Plate Thickness | 4.72″ |
| Area of Bolster (R-L x F-B) | 45.3″ x 26.8″ |
| Throat Depth (F-B) | 13.78″ |
| Bed Deflection | 0.0018″ |
| Shutheight Maximum (SDAU) | 13.78″ |
| Shutheight Adjustment | 3.15″ |
| Drive Motor | 10 HP |
| Compressed Air Requirement | 80 psi |
| Electrics | (230V or 460V) / 3 Phase |
| Approximate Press Size (R-L x F-B) | 43.7″ x 70.5″ |
| Approximate Press Height | 120.5″ |
| Approximate Press Weight | 20,900 lbs |
Standard Features
- Automatic Recirculating Oil Lubrication
- Automatic Oil Counterbalance Lubrication
- Articulated Control Arm Mounting
- Area Die Lights
- Fabricated Steel Frame
- Wet Clutch/Brake
- Hydraulic Overload Protection
- 6-Point Slide Guiding
- Single Gear Reduction Drive
- Isolator Mounts
- Built to JIS Class 1 Accuracy Standards
- Powered Die Height Adjustment w/Electronic Readout in Millimeters and Inches
- PLC-Based Control with 10” Color Touch Screen
- 8 Channel PLS
- 8 Input Die Protection
Options
- Auto Shutheight ADJ
- Built-In Tonnage Monitor
- 8-Point Slide Guiding
- Inclined (or Incline-Able Forms)
- Non-Geared (Flywheel-Type) Drive for Higher Speed Applications
- Custom Stroke and Die Height
- Custom High-Energy Drive for Tough Forming or Drawing Applications
- Custom Slide and Bolster Dimensions
- Custom Controls
- Custom Die Cushions
- Quick Die Change Equipment
- Point-of-Operation Guarding
- Coil Feed Lines and Automation
Variety of Gap Frame Presses
Our line of gap frame presses for metal stamping are perfect for getting the job done at a reasonable cost. If you are looking at replacing an old press or adding to your capabilities, Titan Presses has the right size to fit your needs. Please download our brochure to see all of the specifications for each individual press side-by-side to help you make the best decision possible.
Turnkey 110 Ton Gap Frame Press Solutions
We can supply a press equipped to your exact requirements or provide a turnkey stamping line. These presses are specifically designed for the U. S. market offering the latest features available & equipped with off the shelf American supplied electrics as well as high end press controls. These presses comply with OSHA / ANSI standards. The presses and parts are stocked at our facility and may be inspected under power on our floor. Service is also through StampTech.